POLYPROPYLENE COPOLYMER
INJECTION MOLDING

PPCP EP-V 31 RA

PARAMETER TEST METHOD VALUE UNIT
Melt flow rate (230 °C, 2.16 kg) ISO 1133 21 dg / min
Density ISO 1183 0.9 g/cm3  
Flexural modulus ISO 178 1500 N/mm2
Tensile strength yield ISO R 527 27 N/mm2
Elongation at yield ISO R 527 8 %
Izod Impact Strength (notched) at 23°C ISO 180 6.5 kJ/m2
Hardness Shore D ISO 868 69 Points
Vicat softening point (9.8 N) ISO 306/A 151 °C
H.D.T. (0.46 Mpa) ISO 75/B 100 °C
Accelerated oven ageing in air

(forced circulation) at 150 °C

ISO 4577 360 hours
APPLICATIONS

Production of thin-walled articles or articles with long flow paths such as flower pots, containers, housewares, filters, filter housings and appliance components

RELATED PRODUCTS